The SB VSD Series, direct driven with Inverter, always ensures the highest reliability in any work condition, minimizing power losses and guaranteeing a low noise level for each revolution and a perfect alignment of the rotating elements.
The SB VSD series entwines the benefits of a compact screw compressor, with low installation and management costs and excellent performance. Total function control through a user-friendly electronic board ensures customers can navigate the control board with ease to change pressure settings and operational times.
Reduced overall dimensions and simplified installation are a win to customers looking to overcome space problems and reduce noise output to a whisper. Cost savings are huge.
Variable Speed Drive allowing for noticeable power saving when compared to Fixed Speed model
Dryer before air receiver ensures the storage of dry air. Any large bursts of required air will always be dry
Compressor, Tank and Dryer all in one unit ensures minimal footprint with maximum quality compressed air
Phase Reversal Protection, Overheat Protection, Motor TH Protection, Emergency Stop Protection, Pressure Protection
5 year / 10,000 hour warranty
Very quiet full load operation – standard conversation can be held right next to the machine.
Single Access Service Panel
For increased efficiency and servicing, the SB Series is complimented by a single-entry service panel. Through this easy to remove panel, the standard service procedures can be completed. Further panels may need to be removed to properly clean the machine in the event of a dusty environment.
Dry Air Storage Receiver Tank
By ensuring the compressed air proceeds through the air dryer prior to the storage tank, we can store dry and clean compressed air. Any sudden bursts of air flow required in the customers factory will be supplied from the dry air stored inside the receiver. This prevents moisture carry over in the case of the air flow exceeding the dryers capacity at peak flows.
100% Italian Manufactured
The Focus SB Series are 100% manufactured in Venezia, Italy with each unit passing through stringent quality controls prior to shipment.
Based on direct, user-friendly reading, all machine functions are run safely through a microprocessor, from the control of safety alarms (oil temperature, electrical engine, control of cooling electrical fan, maintenance time) to command systems (start-stop, alarm reset).
Power Isolator Safety Switch
Access to the electrical cabinet is protected by the safety isolator switch. Entry to the cabinet is not possible until the safety switch is off and the cabinet is free from electrical current. This prevents accidents occurring to staff when adequate training is not present.
Emergency Stop Button
Only to be used in case of an emergency. Vital action must be taken should the air supply need to be immediately shut off. For immediate machine shutdown, the emergency stop button will cut power to all components of the machine causing it to stop immediately.
IE3 Efficient Italian Motor
A high quality and IE3 motor will ensure the efficient operation and longevity in even the harshest environments. Manufactured to the highest standard to be included in the SB Range, the electric motor will power the compressed air through your factory for many years to come.
Flat Frame Base for Forklifts
Forklift access is available directly under the machine by utilising the flat leg supports welded to the machine tank. This allows for stable and steady transportation from the delivery truck to the desired installation area.
The SB range consists of a compact footprint designed to take up minimal space on customer premises. With the compressor, dryer and tank all integrated into the one combination unit, the footprint has further reduced in comparison with stand-alone units.
Efficient Dryer and Auto Drain
The SB Series Refrigerated Air Dryer operates at 5 degrees dew point and eliminates moisture from the compressed air prior to entry to the air receiver tank. The drain tube for the moisture is expelled through the side of the machine and into a wastewater disposal for the client.
Separate Dryer Controller
The SB Series includes an air dryer control board as a separate component to the Compressor controller. This allows independent controlling and access to parameters and ensures no neutral is required for electrical connection.
Insulation is Both Fire Retardant & Soundproof
5 Year / 10,000h Warranty
The electric motor used by the compressor is a PREMIUM EFFICIENCY IE3. This ensures its efficiency exceeds and is compliance with the minimum efficiency requirements (MEPS). This first-class performance guarantees energy savings over time and the best-in-class reliability of a high standard certified product.
The belt drive system is engineered to guarantee driving stability during a work phase and off load cycle. The plate system with a sliding electrical motor is designed to prevent stress to rotating parts.
Our machine, availing itself of a poly-v belt-driven system with cast-iron taper-hub pulleys, always ensures the utmost reliability in any work condition and limits power loss with low noise level of rotating elements together with their perfect alignment.
Moreover, an easy system of belt tightening allows an accurate adjustment of the belt itself.
The SB Fixed Speed Base Mount Series is fitted with a professional grade double thickness soundproofing foam with fire retardant and oil resistant characteristics for maximum protection and easy cleaning.
The access to all microprocessor functions is protected by password (supplied only to authorized staff).
The SB Series includes a mounted pre-filter that guarantees the protection of internal component by filtering all the machine air intake from dust, dirt, shavings and pollutants that will prematurely clog the air filter.
A high flow-rate electrical fan, almost noise-free, circulates and pushes all air flow into just one point, ensuring the right thermal balance for all the internal components.
The SB Series Combination models, with a large intake and exchange surface is designed to maintain a low level of flows or noticeable air movement even in an environmental condition with high temperatures.
Vacuum-brazed radiators in aluminium alloy with highly efficient tubular parts ensure the most premium and effective cooler in the range.
Top-level pumping system with integrated unit guarantees greatly reduced overall dimensions and the ability to produce large outputs in a compact, clean combination unit:
These air-ends ensure little wear-and-tear, high efficiency, long-lastingness and reliability.
The Inverter technology characterizes the SB Series screw compressors.
The electric rotation speed regulation system of the air-end-engine group will follow the need of compressed air modifying the production depending on the request.
Therefore, the best optimization of absorption of energy from the electric grid is achieved, in proportion to the production of compressed air required by the system.
Focus Industrial Gives Your Business Peace Of Mind With Air Compressor Servicing And Repairs For All Brands And Systems.
Our service centre is based out of Western Sydney, NSW. Our technicians also operate on the road. Providing 24/7 support to any plant or operation across the East Coast.
Fill in your details below and we’ll be in contact shortly.
Compressed Air Solutions
© Focus Industrial 2022. T&Cs. Sitemap
STAY IN THE LOOP
Join our mailing list and get first access to your offers, new products and more!
Copyright 2021 | All Rights Reserved
OUR PRODUCT SPECALIST ARE STANDING BY TO DELIVER YOUR QUOTE IN UNDER 24 HOURS!